An attic bedroom exploits roof space previously devoted to high school yearbooks and nesting sparrows. Reclaiming the space under your roof also avoids many zoning and easement concerns — common chores when adding onto a house.
Attic Bedroom Costs and Value
Converting an attic to a bedroom yields a modest return on your investment. According to “2015 Remodeling Impact Report” from the NATIONAL ASSOCIATION OF REALTORS®, an attic bedroom conversion that includes a small bath has a national median cost of $65,000 and retains 61% of its value if you should decide to sell your house.
Nevertheless, most homeowners who undertook an attic conversion have no regrets — the project gets a Joy Score of 9.4, a rating based on those who said they were happy or satisfied with their remodeling, with 10 being the highest rating and 1 the lowest.
But just because adding an attic bedroom under your rafters is a smart money move, it may not be practical or even doable. To determine if an attic bedroom is right for you, consider:
- Building codes
- Support structures
- Electrical, HVAC, and plumbing systems
Are Building Codes on Your Side?
Although home owners often consider building codes to be obstacles, safety and durability are the real missions of codes. Because local codes vary, your building inspector can provide a list of applicable codes and required inspections for your new attic bedroom.
- Ceiling codes: Generally 7 feet 6 inches high over a minimum floor area of 70 square feet. If you have an attic shorter than required by code, you won’t be able to remodel it into living space.
- Joist codes: Ask an architect or structural engineer if your attic floor joists meet local codes and can support the additional weight of a remodeled space. Also ask if the rafters can support drywall, lighting, electrical, plumbing, and HVAC system components. Consultation costs $50 to $150 per hour.
- Egress codes: Regular bedroom egress codes typically require at least two exits — a doorway and usually a window. An attic bedroom requires both a window and a staircase to the level beneath. Having an escape ladder in clear view is always a good idea.
The structural framing beneath your roof — rafters or trusses — will determine if you can add an attic bedroom and what it might look like.
Rafters, internal beams extending from the peak of the roof to its eaves, provide a center open space that you can readily remodel.
Trusses, W-shaped framing that supports the roof, make things harder. To achieve the attic bedroom you want, you might have to cut through, shore up, and otherwise alter the very structures that keep your roof above your head. It may not be practical. Consult a structural engineer and/or a licensed architect to determine if modifying trusses is a good idea.
Extending Systems to Your Attic Bedroom
- Electrical: Consult a licensed electrician to determine if your electric panel has room for additional breakers and can handle the increased load of an attic bedroom. If your system can handle the additional demands, running wires to the attic is relatively simple.
- Plumbing: Cut costs by locating the new bathroom close to the main stack—large pipes that carry wastewater to your sewer or septic tank. This reduces the length of pipe you’ll run between sink-shower-toilet drains and the stack.
- HVAC: An HVAC specialist will tell you if your forced air blower can move enough air to both heat and cool your attic bedroom. If it doesn’t, electric baseboard heating and a window air conditioner may suffice. Be sure your electrician knows your heating and cooling plans to determine the total electrical requirements of your new attic bedroom.
An attic bedroom requires a standard staircase to meet code; a ladder is insufficient. Adding a staircase will take up space in a room below the attic, so consider converting a closet. You may be able to regain that storage space by using space under the new staircase.
Staircases with straight runs are easiest to construct but take up the greatest area, just over 40 square feet. Depending on materials and finishing touches, such as newel posts and hardware, costs can range from $500 to $3,000.
Spiral staircases take up the least area but are typically more expensive. Prices for a wood or metal-wood staircase kit ranges from $2,000 to $6,000; installation ranges from $600 to $1,200.
If you’re short on inside space, exterior access — a staircase outside the house — may be a solution. Check with your zoning department, which may interpret an outside staircase as a sign of a multi-unit dwelling, which may not meet neighborhood zoning requirements.
By: Benjamin Allen